Uploading Video From Axon 2 Taser Axon 2 Wifi

Page ane of 22

TASER Axon Mic

User Transmission

Model AX100four

Of import SAFETY INSTRUCTIONS

Read all warnings and instructions. Salvage these

instructions.

The near upwardly-to-date warnings and instructions are

available at www.TASER.com

MMU00## Rev: X1

Page 2 of 22

Table of Contents

Chapter 1: Introduction ...................................................................................................................... 4

What Is the Axon Mic? ..................................................................................................................... 4

Important Safety and Health Information ................................................................................... 4

Additional Reading .......................................................................................................................... four

Affiliate two: Becometing to Know Your Axon Mic ..................................................................................... 5

Accessories ....................................................................................................................................... 7

Parts ............................................................................................................................................... 8

Assembly and Use ....................................................................................................................... 8

Affiliate iii: Recording with the Axon Mic ...................................................................................... 10

Operating Modes .......................................................................................................................... 10

BUFFERING Moddue east (Turning on theastward Microphone) ................................................................. ten

EVENT Fashion (Starting Recording) .......................................................................................... 11

Calculation Markers to Recorded Audio........................................................................................... 11

Battery Status ................................................................................................................................ 12

Configuring Your Axon Mic ......................................................................................................... 12

Adjusting the Audio Prompt Volume ..................................................................................... 12

Turning off theast Microphone LEDs (Stealth Mode) ............................................................... 12

Other Settings ........................................................................................................................... 13

Chapter 4: Notification Reference Tables ..................................................................................... xiv

Audio Prompts .............................................................................................................................. 14

LED Status ...................................................................................................................................... 14

Operation LED ........................................................................................................................... 14

Role LED .............................................................................................................................. 14

Bombardment LED ................................................................................................................................ 15

Upload Statu.s.a. LED .................................................................................................................... 15

Affiliate five: Axon Signal Operations................................................................................................ 16

Chapter six: Care and Maintenance ................................................................................................. 17

Cleaning the Axon Mic ................................................................................................................. 17

Charging the Battery .................................................................................................................... 17

Replacing thursdaye Battery ................................................................................................................... 17

Folio 3 of 22

Affiliate 7: Troubleshooting ............................................................................................................ 19

Client Service .......................................................................................................................... 19

Warranty Policy ............................................................................................................................. 19

Warnings ........................................................................................................................................ 19

Radio Waves .................................................................................................................................. 19

Annunciation of Conformity ................................................................................................... 21

Page 4 of 22

Chapter i: Introduction

What Is the Axon Mic?

The Axon Mic is an audio recording device. This microphondue east is designed for use in tough

environmental conditions encountered in law enforcement, corrections, military, and

security activities. The Axon Mic is designed to record events for secure storage, retrieval,

and analysis via Evidence.com services. The recorded events are transferred to your

storage solution via the Axon Dock, Axon View Forty, or past using Testify Sync software

installed on a Windows calculator.

The Axon Mic has 2 operating modes designed to accommodate the needs of law

enforcement, corrections, security, and thursdaydue east war machine. The default mode, or BUFFERING

mode, ensures the microphone is ON and ready to record prior to the user activating the

Upshot mode.

Important Safe and Health Information

Read, understand, and follow all warnings and instructions before using this product.

The most up-to -date warnings and instructions are available at www.taser.com.

Additional Reading

This manual explains how to operate the Axon Mic hardware. Other manuals encompass

additional aspects of the Axon Mic and Axon Armada system. Thursdayese documents are available

at www.taser.com.

The Axon Academy website explains how to register for the Show.com website,

configure settings, install Evidence Sync southoftware, assign personnel to devicesouthward, recharge

your device, and transfer audio from an Axon device to a computer. Visit academy.axon.io/.

Detailed instructions for using Axon devicedue south and other TASER products with Bear witness Sync

are available in thursdaye Show Sync Utiliser Manual.

If yous have an Axon Dock, see the Axon Dock Quick Start Guide for how to transfer

information and recharge your Axon Mic.

The Axon View XL Transmission provides instructions for using yousr mobile data terminal (DocT)

with your Axon Fleet organisation.

Page five of 22

Chapter 2: Getting to Know Your Axon Mic

The Axon Mic includes physical controls to enable audio capture while providing visual,

audible, and vibration notifications of theastward Axon Mic's state of functioning.

acme view bottom view

front view

Operation LED

Shows the Mic'south electric current operating mode (for Battery condition, see the battery LED, described

below).

Recording

Recovering interrupted fiveideo

Booting up/powering dowdue north

Error state

When the Function LED also is blinkinm ruddy.

When the Function LED also is solid red.

Page 6 of 22

Function LED

Shows when certain functions are enabled.

Bluetooth feature is booting up

Wireless accessory configuration (WAC)

Employ the power switch to plow the Mic off and on.

Connection Socket Enables information transfer and recharging. On/Off Switch Turns the Mic's

ability on or off.

On/Off Indicator When the Mic's power is turned on, the cherry portion is exposed. When

the Mic ability is turned off, the red portion is covered from view.

Speaker Provides audio notifications.

Function Button Used in device pairing, to muteast the device, and to add markers to the

sound as information technology is recorded.

EVENT Push button Used to first and end recording. (Double-printing to commencement; hold for 4

seconds to stop recording.)

The Mic might take several additional seconds to shut out of the video when it is powered

off before stopping an event.

Bombardment Statudue south Button When pressed, the Bombardment button lights up the Battery LED, which

momentarily indicates the remaining battery capacity only (information technology does not indicate the

operating mode).

Battery LED

When lit, momentarily indicates the remaining battery capacity (information technology does not indicate the

operating mode).

Battery chapters is 41100 percent

Battery capacity is twentyforty percent

Battery capacity is less than 20 percent

Red during operation; flashing red and yellow

during charging

Battery is critically low

When yous plough the Mic on, the Operation LED turns solid cerise united nationstil the system is ready to

utilize. Then the Operation LED blinks green (BUFFERING mode) and the Battery LED goes

out.

Dual-Channel Microphone For audio recording.

Page vii of 22

Upload Status LED

Indicates statusouth when the Mic is uploading data to the Prove.cok website via the Axon

Dock.

Initial connexion (momentary)

Solid red (for twenty seconds or fewer)

Device set up (all videos uploaded successfully)

and fully charged

Device not assigned, agency mismatch, or

device error

Firmware update, internal battery charging,

extremely low battery, or memory full

Blinking red and yellow

Transfer mistake, device re-trying to transfer

Blinking green and yellowish

Network error (no connexion)

Blinking red, yellowish, and then greenish (cycling all

colors)

Axon Dock has no advice with the

device. Contact TASER customer servicdue east.

Pressing buttons causes the Axon Mic to emit audio alerts (beeps) to indicate system

actions. Meet Chapter 4: Notification Reference Tables for more information.

Accessories

The Axon Mic is designed to work with the new Axon RapidLock mounting system. The

RapidLock mounting organization consists of the attachment piece (called the key) on the device

and the various mounting options including the zipper receiver (called the lock). To

appoint the Axon RapidLock, insert the key of the device into the lock of the mountain and plough

it 90 degrees counterclockwise (when yous are looking straight at the mount). To release the

Axon Mic from the mount, plow thursdaydue east Axon Mic 90 degrees clockwise.

The various mounts that use this system can be used with a wide variety uniforms, and

holds the Axon Mic to your shirt, patrol vest, jacket, or belt.

Folio 8 of 22

Parts

dorsum lock microphone

Assembly and Use

Read Important Safety and Health Information (Chapter 1) before performing these

steps.

1 Insert theastward key on the back of the Axon Mic into the lock.

2 Twist the RapidLock mount counterclockwise, 90 degrees.

iii Identify the magnetic back underneath thdue east shirt, patrol vest, or whatever you are

using.

4 Concord the dorsum in identify, and place the RapidLock mountain over the back. Magnetic

allure will hold the microphone in identify.

1 ii

Folio 9 of 22

Page 10 of 22

Chapter three: Recording with the Axon Mic

Operating Modes

The Axon Mic has two operating modes:

1 BUFFERING (turning on the device and starting pre-event buffering)

two Event (event recording)

BUFFERING Fashion (Turning on the Microphone)

Move the ON/OFF switch on thdue east Axon Mic to the ON position.

With the microphone turned on, the Axon system is in the BUFFERING fashion. When

BUFFERING begins:

The Operation LED on the Axon Mic will blink green.

By default, audio in the BUFFERING gode is OFF.

The Mic will not beast capturing anyaffair unless the bureau has configured "audio in

buffer" ON, and will not record to permanent memory whileastward in BUFFERING mode.

When configuruby at the agency level to be ON, buffered audio duration is 30 seconds past

default (00:00:xxx).

When you activate the EVENT mode, the buffered audio (if this feature is enabled at the

agency level) captured straight before the upshot, up to 30 seconds, volition be saved and

fastened to thdue east effect in permanent memory. This feature is intended to captureastward the audio

of an incident just earlier your activation of EVENT mode.

With default settings, the system does not capture audio in BUFFERING mode, so

anything recorded in that mode volition be video-only. Buffering moderne starts but after

Page 11 of 22

the Axon Mic is turned on. The system doedue south not record when the microphone is

turned off.

Notes:

An bureau can turn off the BUFFERING way. If your bureau has deactivated the

BUFFERING one thousandode, your Axon system westwardill operate the same mode every bit described in this

manual, only the device will not tape whatsoever audio until you double-press the Issue

button.

An agency tin can extend the BUFFERING mode's duration to 2 minutes total (00:02:00).

An agency can configure the BUFFERING mode so it records audio.

EVENT Way (Starting Recording)

ane When you northwardeed to record, speedily double-press the Event button on the device.

The organisation northwardow records audio. If "audio in buffer" is configured to exist on, the

"buffered" audio directly preceding the effect will exist saved and attached to thursdaydue east

event recording. (Think, with default settings, the buffer will not contain

audio.) The moment you double-press the EVENT button, audio westwardill be recorded

from the microphone and GPS coordinates (if the system is paired to a GPS-capable

smart phone) will exist recorded. This will continue throughout the elapsing of the

recording until you end the recording.

The Axon Mic provides you with indications that it is recording in EVENT way:

At the start of an event and every 2 minutes during an result, thursdaydue east organization will

beep twice.

The Functioning LED on top of the device will blink red.

two To stop recording and return to BUFFERING mode, press and hold the Consequence push button

for approximately 4 seconds. The system volition beep once (with a long tone).

3 To end a recording and turn off the system, move the on/off switch to the "off"

position. When you cease a recording with the on/off switch y'all will non get into

BUFFERING mode; instead the organization volition turn off completely.

Note: An event not recorded by the microphone cannot be played back or

downloaded to your figurer.

Adding Markers to Recorded Sound

The Office button also tin can be used to add a marker to recorded audio that will show

when the video is replayed on Evidence.com and documented in the audit trail for the

device. Markers are most useful for documenting a moment that yous will want to jump to

Folio 12 of 22

rapidly at a later time when re playing the video. If you lot want to add together a mark to a video

while yous are recording:

Press and releaseast the Function push button inside 1 2nd.

Battery Status

Press the Battery button to decide the percentage remaining in the battery. Meet Affiliate

two: Getting to Know Your Axon Mic for details on the Battery LED functions.

Configuring Your Axon Mic

Adjusting the Audio Prompt Volume

1 Connect the Axon Mic to the Evidenceastward Sync awarding.

two Select the device settings.

3 Select the desired volume settings for the audio beeps recorded by the device.

The volume has 4 settings. At each level, the Axon Mic beeps, providing you lot with a

sample of the volume:

Low

Medium

High

Off

Turning off the Microphone LEDs (Stealth Mode)

For some situations, you lot may wish to plow off the low-cals on your Mic. You lot can turn off the

lights through the Bear witness Sync software or by using the Battery button. To turn the

lights off using the Battery button:

Press and hold the Battery button for 10 seconds.

To turn the lights back on:

Press and hold the Battery button for x seconds.

To use Evidence Sync:

1 Connect the Axon Mic to the Evidence Sync application.

ii Select the device settings.

3 Select the option to turn off the device LEDs.

Page 13 of 22

The Performance LED flashes red, xanthous, and then light-green before shutting down the

lights.

Pressing the Bombardment button will momentarily light both the Operation LED and

the Battery LED, displaying the current operating mode and battery level. For

interpreting the LED colors, meet Chapter ii: Getting to Know Your Axon Mic.

To turn the lights dorsum on:

1 Connect the Axon Mic to the Evidence Sync application.

two Select the device settings.

iii Select the option to plough on the device LEDs.

Other Settings

Your organization's administrator tin further configure your Axon Mic with these features:

Pre-event buffer of upwards to 2 minutes

Axon Signal-enabled Bluetooth wireless technology

Page 14 of 22

Chapter four: Notification Reference Tables

Audio Prompts

The Axon Mic emits beeping sounds chosen "audio prompts" to notify you of the systek

status. These audio prompts usually occur after you lot perform an action with the

microphone. These audio prompts are accompanied by a vibration that matches the beeps.

Haptic Notification

(Vibration)

2 beeps (every two minutes)

Printing the Bombardment button while

the device is recording

The device is catastrophe an event

and re- turning to BUFFERing

mode

The battery is at 20 percent

capacity or lower

Four quick beeps (every 5

minutes)

4 times, quickly, eastwardvery 5

minutes

The device's memory is full

Three beeps. The device will non

beginning recording.

LED Status

Operation LED

Recording

Recovering interrupted audio recording

Booting up/powering downorth

Error land

* When the Function LED also is blinking reddish.

** When the Function LED also is solid red.

Function LED

Bluetooth feature is booting upward

Page 15 of 22

Wireless accessory configuration (WAC)

Utilise the power switch to plough theastward Axon Mic off and on.

Battery LED

Battery capacity is 41100 percent

Bombardment capacity is two040 percent

Battery chapters is less than 20 percent

Ruby during operation; flashing cerise and xanthous

during charging

Battery is critically depression

Upload Condition LED

Initial connexion (momentary)

Solid ruddy (for 20 seconds or fewer)

Device ready (all files uploaded successfully)

and fully charged

Device not assigned, agency mismatch, or

device error

Firmware update, internal battery charging,

extremely low battery, or memory total

Blinking red and yellow

Transfer error, device re-trying to transfer

Blinking light-green and yellowish

Network error (no connexion)

Blinking red, yellow, and then dark-green (cycling all )

colors)

Axon Dock has no communication with the

device. Contact TASER client service.

Page 16 of 22

Chapter five: Axon Signal Operations

Axon Signal technology is included with the Axon Armada cameras and microphone device.

Nevertheless, your agency'due south administrator must accept activated the Axon Signal capability for it

to work.

When it is active, Axon Signal technology takes your devices from BUFFERING to EVENT

way automatically.

Emergency vehicles tin be equipped with an Axon Signal Unit (ASU). With light bar

activation, or other activation triggers, the ASU sends a signal to your Axon devices. Upon

processing this signal, your Axon devices transition from BUFFERING to Issue mode. When

your device kickoffs recording, you will hear two beeps.

The ASU has a range of approximately 30 feet (9.1 meters). Some other vehicle'south light bar

activation may cause your Axon devices to start recording if the light bar is equipped to exercise

so.

The ASU can just send a betoken to tell the device to start recording. Axon Signal technology

does not end recording. If a low-cal bar is turned off, the device will continue to record.

The ASU cannot turn an Axon systethousand on. If the Axon devices are turned off, they will northwardot

tape fifty-fifty if an ASU sends an activation point.

Page 17 of 22

Chapter 6: Automobilee and Chiliadaintenance

Cleaning the Axon Mic

Utilize a soft, damp material to clean the surfacdue east of the Axon Mic. Exercise not use harsh cleaners or

solvents. Do not immerse the Axon Mic in h2o or cleaning solutions.

Charging the Battery

A fully charged device bombardment should provide plenty power for approximately 12 hours of

normal functioning. Recharging a battery afterward a 12-hour utilize can take up to vi hours if you

are recharging your Axon Mic from a wall outlet or Axon Dock. Recharging could take

considerably longer if y'all are recharging from a computer.

If the battery depletes significantly during utilise, you will hear 4 quick tones repeating every 5

minutes. This one thousandessage indicates that less than approximately twenty percent of the battery

capacity remaindue south.

Always recharge a depleted battery equally shortly as reasonably possible. You can use an Axon

Dock, wall charger, or estimator to charge the battery. Using a non-TASER approved wall

charger may degrade device performance and will void the warranty.

If the Axon Mic is to be stored for a fiftyong time, the Battery LED should be xanthous when you

put the camera in storage. Later on an Axon Mic hequally been stored half dozen months, the device should

exist run until the battery is depleted and then the battery should be recharged.

Replacing the Battery

Replacement batteries are combined with the back portion of an Axon Mic. Replacing a

battery involves removing the back of the de vice and installing a new dorsum.

one Turn the Axon Mic off.

2 Using a Torx T6 screwdriver, remove the screws from the Axon Mic.

Page 18 of 22

3 Remove the back of the device.

4 Put the new device back in place with the device front end.

5 Using a Torx T6 screwdriver, fasten the screws into the new device back. Do not

over-tighten.

Folio xix of 22

Chapter seven: Troubleshooting

If you experience difficulty with your Axon Mic, get-go power theastward device down, and start it

again.

Client Service

Visit www.taser.com and view the Support options, or call i-800-978-2737.

Warranty Policy

TASER International warranty provisions are applicable on all Axon Mic products. Meet

TASER International'due south website, world wide web.taser.com, for detailed warranty data.

Warnings

For a full list of the warning associated with this product, come across world wide web.taser.com.

Radio Waves

Changes or modifications to the equipment not expressly approved by the manufacturer

could void the product warranty and the user's authorisation to operate the equipment.

Your wireless device is a radio transmitter and receiver. It is designed and manufactured

not to exceed the emission limits for exposure to radio frequency (RF) energy set up by the

Federal Communications Committee (FCC) of the U.S. Government. These limits ardue east part

of comprehensive guidelines and establish permitted levels of RF energy for the full general

population. The guidelines are based on standards that were developed by independent

scientific organizations through periodic and thorough evaluation of scientific studies. The

standards include a substantial safety margin designed to assureastward the safety of all persons,

regardless of age and health. Before a device model is available for sale to the public, it

must exist tested and certified to the FCC that it does non exceed the limit established past the

government advertizingopted requirement for safe exposure. This equipment has been tested and

institute to comply with the limits for a Class B digital device, pursuant to part fifteen of the FCC

Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and tin radiate

Page xx of 22

radio frequency energy and, if northwardot installed and used in accortrip the light fantastic with the instructions,

may cause harmful interference to radio communicationsouth. However, there is no guarantee

that interferencdue east will not occur in a detail installation. If this equipment does cause

harmful interference to radio or television reception, which can be adamant by turning

the equipment off and on, the user is encouraged to try to correct the interferenceast by one

or more than of the post-obit measures:

Reorient or relocate the receivingrand antenna.

Increase the separation betwixt the equipment and receiver.

Connect the equipment into an outlet on a excursion different from that to which the

receiver is connected.

Consult TASER International Customer Service for help.

FCC/IC NOTICE: This device meets the body worn homo exposure limits plant in OET

Bulletin 65, 2001, and ANSI/ IEEE C95.1, 1992. Proper operation of this equipment

co-ordinate to thursdaye instructions plant in this guide will result in exposure substantially below

the FCC's recommended limits. To comply with the FCC and ANSI C95.ane RF exposure limits,

this device has been tested for compliance with FCC RF Exposure limits in the typical

configuration. The radiated output ability of this wireless device is far below the FCC radio

frequency expocertain limits.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two atmospheric condition: (1) This device may non cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

RSS 210 Warning Statement: The installer of this equipment must ensure that the antenna

is located or pointed such that it does not emit RF field in backlog of Health Canada limits for

the general population; consult Safety Code 6, obtainable from Heath Canada'due south Web site

www.hc sc.gc.ca/rpb.

This device complies with Industry Canada licence-exempt RSS standard(southward). Operation is

subject area to the following two conditions: (1) this device may not cause interference, and (two)

this device must have any interference, including interference that may cause undesiblood-red

operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence. 50'exploitation est autorisée aux deux conditions suivantes : (1)

l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de fifty'appareil doit accepter

tout brouillagdue east radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement.

THIS MODEL DEVWater ice MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO

RADIO WAVES.

Section eight.4 of RSS-GEN

Page 21 of 22

This Device complies with Industry Canada License-exempt RSS standard(s). Operation is

field of study to the following 2 conditions: ane) this device may not cause interference, and 2)

this device must accept whatsoever interference, includ- ing interferencdue east that may cause undesired

performance of the device.

Cet appareil est conforme aux normes d'exemption de licence RSS d'Industrie Canada. Son

utilisation est soumise aux conditions suivantes : i) cet appareil northe doit pas causer de

brouillage, et 2) doit accepter tout brouillage, y compris le brouillage pouvant entraîner un

fonctionnement indésirable.

Section eight.3 of RSDue south-GEN

Nether Industry Canada regulations, this radio transmitter may just operate using an

antenna of a type and maximum (or lesser) proceeds canonical for the transmitter past Industry

Canada. To reduce potential radio interference to other applyrs, the antenna type and its

gain should exist and then called that the equivalent isotropically radiated power (e.i.r.p.) is non

more than that necessary for successful advice.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio ne peut

fonctionner qu'au moyen d'une pismireenne d'un seul type et d'un gain maximal (ou inférieur)

approuvé cascade l'émetteur par Industrie Canada. Dans le simply deast réduire les risques de

brouillage radioélectrique pour les autres utilisateurs, il faut choisir le blazon d'antenne et

son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.due east.) ne dépasse pas

celle requise pour établir une communication satisfaisante.

THIS MODEL DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO

RADIO WAVES.

Proclamation of Conformity

TASER International declares that this Axon organization is in compliance with the requirements

and other relevant provisions of the RTT&E Directive 1999/5/EC regarding radio and

telecommunications equipment and the Directive 2014/xxx/Eu regarding electromagnetic

compatibility. A copy of the original Declaration of Conformity can be found at

www.taser.com.

Folio 22 of 22

Product functions and specifications may alter without notice and the actual product may vary from the illustrations in this manual.

Bluetooth is a trademarker of the Bluetooth SIG, Torx is a trademark of Acumen Global Technologies, and Windows is a trademark of

Microsoft Corporation.

, AXON, Axon, Axon Dock, Axodue north Fleet, Axon RapidLock, Axon Signal, Axon Fiveiew, Show.com, Evidence Sync, TASER, and © are

trademarks of TASER International, Inc., some of which are registered in the The states and other countries. For more information, visit

www.taser.com/legal. All rights reserved. © 2016 TASER International, Inc.

MMU00## Rev: X1

vignahadeard.blogspot.com

Source: https://usermanual.wiki/TASER/S00947.Axon-Body-2-User-Manual/html

0 Response to "Uploading Video From Axon 2 Taser Axon 2 Wifi"

Enregistrer un commentaire

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel